VERTICAL BLINDS FITTING INSTRUCTIONS

Top Fix: Snap-In (A):
Slot the front lip of the headrail over the leading edge of the bracket and snap upwards securely into position.
Top Fix: Rigid (B):
Slot the front lip of the headrail over the leading edge of the bracket, push upwards and tighten screw to secure. (Be careful not to overtighten).
Face Fix: (C):
Slot the back lip of the headrail over the locating tang of the bracket, push upwards and tighten screw to secure. (Be careful not to overrighten).
Attaching the Vanes
With the control in the open position, slip the hanger up and into the traveler hook as shown.
(Use the 1st or 2nd position as desired).

Stabilizing Chain
Present each clip to the weight post at a 45' angle as shown and push securely onto post.

Note. If installing blinds with a split draw, cut chain at the parting point.

Please print this page for use.

Unit 32, Six Harmony Row, Glasgow U.K. G51 3BA

Telephone: 0141 445 3600